Lab Kit Equipment

Lab kit is the property of the School of Physics. Upon completion of this course you need to return your lab kit to your instructor in the same condition in which it was received, and it should include all items that were in the original package (except for paper templates).

Item Quantity Picture
iOLab device 1
Transparent Storage Box 1
Aluminum pushpin 2
Cork board 1
Conducting paper with two small circles 1
Paper template with two small circles* 1
Conducting paper with two small circles and a circle in the center 1
Paper template with two small circles and a circle in the center* 1
Conducting paper with two concentric circles 1
Paper template with two concentric circles* 1
Strip of conducting paper 1
47 μF Capacitor 1
100 μF Capacitor 1
470 μF Capacitor 1
1000 μF Capacitor 1
2.2 kΩ Resistor 1
4.7 kΩ Resistor 1
22 kΩ Resistor 1
47 kΩ Resistor 1
Unknown Resistor 1
Light-emitting diode (LED) 1
Resistor Tetrahedron
(soldered out of 2.2 kΩ resistors)
1
Resistor Cube
(soldered out of 2.2 kΩ resistors)
1
Eye bolt
(Your kit has either eye bolt or small disk)
1
Small disk
(Your kit has either eye bolt or small disk)
1
4.7 Ohm resistor 2
1 Ohm resistor 2
Breadboard 1
Short jumper wire 4
Long jumper wire 4
Alligator clip wire 3
Battery Holder 1
Blue magnet 1
Black magnet 1
Ruler 1
Short plastic tube 1
Short wooden rod 1
Long (2 ft) plastic tube 1
Long (2 ft) wooden rod 1
Long blue wire 1
Whire wire (18") 2
Red wire (18"), half-stripped on one end 1
Short stripped wire 2
Rubber band 4
1" L type copper tube 1
3/4" L type copper tube 1
3/4" M type copper tube 1
Pen** 1
AA battery** 1
Scotch tape** 1

 

* Does not need to be returned at the end of semester.

** Not supplied with lab kit.